Set-Up Sub-Menus - PolyScience LX Immersion Circulator Operator's Manual

Set- Up Sub - Menus
!
Press the Menu button to access the Temperature Controller's

set-up sub-menus.

Sub-Menu
Temperature Set
Point
Temperature Unit
Timer
To accept a value in a sub-menu, press the
12
IMPORTANT: The Circulator's set-up sub-menus
cannot be set/changed while the Circulator is heating
or circulating the bath liquid. You must first place the
unit in Standby by pressing
Selection /
Range
5° to 98°C
41° to 208 °F
°C
°F
00:05 to 99:00
.
To Change Current Value
Press or
temperature value is displayed.
Press once for °C.
Press three times for °F.
Press twice and then enter
the desired time period using
and buttons.
button.
until the desired
110-874