Adjusting The Temperature Set Point; Selecting The Temperature Unit - PolyScience LX Immersion Circulator Operator's Manual

Adjusting the Temperature Set Point

This is the temperature at which the fluid in your circulating bath
will be maintained. It may be set to one-tenth of a degree over a
range of 5° to +98°C / 41° to +208°F. The factory default is
20°C / 68°F.
1. Press once
for °C or three
times for °F.
3. Press .

Selecting the Temperature Unit

The temperature units sub-menu allows you to select the
temperature unit in which the actual bath temperature and set
point temperature are displayed. The factory default is °C.
1. Press once
for °C or three
times for °F.
2. Press .
110-874
2. Press and/
or until the
desired set point
temperature is
displayed.
Current
Temperature
Unit
13