Advertisement
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Read the operating manual thoroughly before using the reciprocating saw.
When working with the reciprocating saw, wear protective glasses.
Proper use
This product is a hand-guided power tool, which can saw various materials, due to the lifting motion of
a single-sided fixed sawing blade. Tight corners and wavy lines can be sawn into thin sheets or boards.
Wood, metal, plastic and other similar materials stated in the manual can be processed. In the pendulum
stroke operation (optional), the saw blade oscillates back and forth, this enables the saw dust to be
ejected better. Only saw blades which have been authorised by the manufacturer, as stated in the op-
erating manual, may be used.
Improper use
All purposes of the device, which are not stated in the chapter "Proper use," are regarded as a not proper
use of the device.
The device must not be used for the following purposes:
•
sawing firewood,
•
processing materials containing asbestos or other hazardous materials.
For all material damage as well as personal injury, which occurs due to misuse, resulting from this, the
operator of the device is liable. When using other/not original parts, the warranty of the device given by
the manufacturer will expire.
Residual risks
Even when using the device properly, there is a certain residual risk, which cannot be entirely excluded.
With this type and design of device, the following potential dangers can derive:
•
injuries from cuts with contact with the unprotected part of the saw blade,
•
injuries from cuts with ejected broken parts of the saw blade,
•
thrusts with work pieces being repercussed and ejected,
•
loss of hearing ability without a necessary hearing protection when working,
•
electric shock with contact with electrical currents due to broken or damaged (e.g., sawn) supply
cables, motor casing,
•
emissions of harmful saw dust.
If the instructions contained in this operating manual are not followed, other risks can occur due to
improper operation.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61076
Page 3
06
2021-1
Advertisement
