Using The Countdown Timer - Yaesu FTA-850L Operating Manual

If "RESET" is selected while counting, the timer
will continue to count from "00:00:00".
If "RESET" is selected while stopping, the dis-
played time will be changed to "00:00:00" and the
timer will keep stopping.
Note:
You may change the receive frequency while counting.
Press the [ BACk ] key to display the recall screen list-
ing the frequencies you have used temporarily on the
display, so that you may select a frequency from the
list with the [▲] or [▼] key or change the frequency
with the DIAL knob. Press the [BACk] key again to
return to the Timer screen.

Using the countdown timer

1. Press the [ MENU ] key to display the MENU screen.
2. Select "TIMER" on the screen by pressing the [ ▲ ]
or [ ▼ ] key, and then press the [ ENT ] key.
3. Press the [ ENT ] key.
70
4. Press the [ ▲ ] or [ ▼ ] key
to move the cursor to hour,
minute, or second.
5. Input the time with the key-
pad or the DIAL knob, and
then press the [ ENT ] key.
Press the [ BACk ] key to
cancel the input time.
6. To start the counting, select
"START" on the screen by
pressing the [ ▲ ] or [ ▼ ] key,
and then press the [ ENT ]
key.
The displayed time will
decrease and "START"
changes to "STOP".
The " " icon appears on
the top right of the display
while counting.
7. To stop the counting, se-
lect "STOP" and press the
[ ENT ] key.
To resume the counting,
select "START" changed
from "STOP" and press the
[ ENT ] key again.