Table of Contents
Advertisement
z Reading the CDI
The course deviation needle moves to the right if
your aircraft is off course to the left of the runway,
or moves to the left if your aircraft is off course to
the right of the runway.
The height deviation indicator moves up if your
aircraft flies lower than the ideal altitude, or moves
down if your aircraft flies higher than the ideal
altitude.
N
Left
(LOC)
On course
N
CDI Examples Corresponding to Aircraft Location
(Runway is to be at the back of the screen)
High
(GS)
N
N
Right
(LOC)
N
Low
(GS)
Split Operation
The split operation feature allows you to transmit a
call to a flight service station using the COM band
frequencies, while receiving a station in the NAV
band. VOR stations equipped with this capability
typically are shown, on navigation charts, with the
voice calling frequency in parenthesis above the
navigation frequency.
z Programming a transmit frequency
1. Press and hold the [ MENU ] key to display the
SETUP menu screen.
2. Select "COMM Setup" on
the screen by pressing the
[ ▲ ] or [ ▼ ] key, and then
press the [ ENT ] key.
3. Select "Split Frequency"
on the screen by pressing
the [ ▲ ] or [ ▼ ] key, and then
press the [ ENT ] key.
43
Advertisement
Table of Contents
