Installation Of Docking Station And Charging For The Cleaner; Automatic Recharging; Manual Charging - Fakir ROBERT-L Operating Instructions Manual

7-3 Installation of Docking Station and Charging
for the Cleaner:

Automatic recharging:

1.Install the Docking Station on the flat
ground firmly and against the vertical
wall.
2.No obstacle or hollow areas 3m away from
the Docking Station in the front and 0.5m
on the right and left. (Refer to Figure 1)
3.The Cleaner cannot search the Docking Station
for charging if the infrared signal
transmitting window of the recharger is
covered.
4.Connect the output terminal of the adaptor
with DC socket of the Docking Station.
(Refer to Figure 2)
Please place the power
cord of the adaptor along
the wall, or it may
interfere with the brush
or wheels.

Manual charging:

1.You can use the adaptor or Docking
Station of the Cleaner to charge for
the main body directly.
2.Connect the output terminal of the
adaptor with DC socket of the main
body while
charging. (Refer to Figure 1)
3.Before charging, connect the
adaptor with the Docking Station ,
make sure the cleaner abut
against the Docking Station.
(Refer to Figure2)
using the adapter
ROBERT-L
for
GB
Figure 1
High Voltage!
Electrical
hazard! Please
dry your hands
before using!
Figure
2
High Voltage!
Electrical
hazard! Please
dry your hands
before using!
Figure
1
High Voltage!
Electrical
hazard! Please
dry your hands
before using!
Figure 2
79