Assembly; Unpacking; Mounting Of Wall Charging Station - Fakir AS 1108 TL Operating Instructions Manual

Assembly

Unpacking

Mounting of wall charging station

Fig. 1
Fig. 2
8
Assembly
Unpack the appliance and check the contents
for completeness (see "Scope of delivery and
functions" in table of contents).
Sort the packaging material and recycle accord-
ingly.
If you detect damage from transport, contact
your retail dealer immediately.
WARNING!
Never use a defective appliance.
WARNING!
The charging station (wall mount) must be
mounted firmly on an indoor wall for safe use.
Choose a mounting location that is not ex-
posed to direct sunlight and that is not in the
vicinity of other heat sources.
Make sure the charger is unplugged before
mounting the charging station. Otherwise
there is a danger of electric shock.
1. Find a suitable location on an indoor wall,
near an electrical outlet. Bear in mind the
warnings described above.
2. Hold the charging station on the wall as
shown in Fig. 1, mark the position of the
mounting screws and then drill the holes for
the screws.
WARNING!
Before drilling the holes, make sure that no
electrical wires or pipes will be damaged.
3. Plug the small plug of the charger into the
jack on the charging station.
4. Use two screws to mount the charging sta-
tion on the wall.