Table of Contents
Advertisement
EACIE Evacuation Alert Control and Indicating Equipment
7.4
Engineering Functions
The Engineering Functions menu is used to access the panel's comprehensive test functions and display
important system status information.
At Access Level 3, press the
Scroll down
to view additional engineering menu options (shown below right).
Engineering functions are listed in sections 7.4.1 to 7.4.9.
7.4.1
Device Manager
Using this function you can display, edit and test all the addressable devices stored in the panel's memory
which include loop devices and system devices.
At Access Level 3 > Engineering Functions, press the
the one shown below appears.
Loop 1 shown selected
To view all the devices on the loop, use the
Page 23 of 38 Approved Document No. DFU5030020 Rev 1 Installation and Programming Manual
button and the window shown below left appears.
Loop 1 is shown selected as an example.
Loop Devices window:
- displays loop addresses (up to 66 devices per loop)
- displays loop device icons, examples shown below:
- CAST CA736/CA737 Sounder Controller
- denotes 'no device fitted'
and
buttons to scroll through all the devices.
button and a window similar to
Advertisement
Table of Contents
