C-TEC EACIE Installation, Maintenance & Operating Manual page 6

EACIE Evacuation Alert Control and Indicating Equipment

Short-circuit protected loop driver (rated at 450mA, 40V). Each CAST loop device is fitted with a short-
circuit isolator.

Internal maintenance controls and indicators (not visible to the FRS) include a 4.3 inch, colour LCD
touchscreen and LED indicators.

Custom-made 'slide-in' labelling system for floor-by-floor or zone-by-zone layouts.

EACIE panel housed in a separate protective cabinet which complies with STS 205 complete with a
high security EN 1303 locking system.

RS232 and RS485 ports - for ancillary devices and graphics interface (maintenance use only)

Integrated 'galvanically isolated' USB connection to a PC running programming tools (maintenance
use only).

C-TEC system components satisfy the relevant requirements of the product standard for that component
in respect of electromagnetic capability (EMC).

9,999 event memory for all fault and system events - all filterable (maintenance use only).

Access levels – access level 1 (general user) and access level 3 (authorised systems engineer) with
keyswitch entry to access level 2 (authorised user).
Installation and Programming Manual  Approved Document No. DFU5030020 Rev 1  Page 6 of 38