Changing The Panel's Time And Date; Event Log Functions - C-TEC XFP501E/CA User Manual & Log Book

CAST XFP 16 & 32 ZONE ANALOGUE ADDRESSABLE FIRE ALARM PANEL
Changing the panel's time and date - AL2 (3333) > Set Time/Date
This function allows the panel's time and date to be adjusted. When selected, press the Accept
button and the following window (or similar) will appear:
Set the time:- 00:00
5 6
Use the and
When the correct hour is displayed, press the Accept
5 4
Use the and
When the correct time is displayed, press the Accept
A window similar to the one below will appear:
Set the time:- 16:52
Set the date:- xx:xx:xx
5 6
Use the scroll
4
press the Accept
Event log functions - AL2 (3333) > Event Log Functions
This function allows you to view the panel's event log on the panel's display, or to reset it. When the
EVENT LOG FUNCTIONS? prompt appears, press the Accept
function using the
Note: The PRINT EVENT HISTORY function is for future.
AL2 (3333) > Event Log Functions > Display Event History
The DISPLAY EVENT HISTORY menu option, when selected, displays the panel's 499 event log on the
display. For example:
Event 499 at 01/01/16 11:31:19
Access Level 2 entered
Initially only the last event will appear in the window but you can scroll through the list using the
button to see previous saved events. When the log is full, the oldest record is replaced by the newest
record. Events are listed in chronological order. When you have finished viewing the required events,
3
press the Escape
AL2 (3333) > Event Log Functions > Reset Event History
The RESET EVENT HISTORY menu option, when selected, clears the log from the panel's memory. To
help ensure it is not erased by mistake, a warning will appear when the Accept
Are you sure you want to erase
the Event log?
4
Press the Accept
whilst the log resets after which the panel will return you to the EVENT HISTORY MENU.
Resetting the Event History...
Resetting entry 499
USER MANUAL & LOG BOOK • Approved Document No. DFU5020000 Rev 3 • Page 16 of 24
buttons to adjust the hour (the panel has a 24 hour clock).
buttons to adjust the minutes.
4
and Accept buttons to set the day/month/year as appropriate. When correct,
button again and you will be returned to the main access level 2 menu.
6
button.
button to return to the previous menu.
button to confirm you want to erase the log. The following window will appear
4
button to move to the minutes field.
4
button to alter the date.
4
button and scroll down to the desired
4
5
4
button is pressed: