ICP DAS USA DS-2200 Series Quick Start Manual page 2

1
Connecting the Power and Host PC
1)
Make sure your PC has workable network settings.
Disable or well configure your Windows firewall and Anti-Virus firewall first,
else the "Search Servers" on Chapter 4 may not work. (Please contact
with your system Administrator)
2)
Connect both the DS-2200 and your PC to the same sub network or the
same Ethernet switch.
3)
Supply power (PoE or +12~+48 V
Note : Please use the first RJ-45 jack (ETH1) to connect the PoE Switch
when using the PoE to power.The second RJ-45 jack (ETH2)
doesn't support the PoE function
Technical support:
DC
service@icpdas.com
) to the DS-2000.
P2