Summary of Contents for Sonova Phonak Roger NeckLoop
Page 1
Roger NeckLoop for Dynamic SoundField Installation Instructions Roger NeckLoop is a Roger device that upgrades an amplification system to intelligent dynamic behavior. This guide is aimed at technicians. Connect to the mains Connect to Roger microphones See Roger NeckLoop quick setup guide max.
Page 2
Placement Setting the microphone gain The correct microphone gain setting is crucial to avoid • The distance between the Roger NeckLoop and the room’s acoustical feedback. existing amplifier system should be as short as possible. • The power supply for the Roger NeckLoop and the power supply for the amplifier can be fed from the same mains.
Page 3
In case of acoustical feedback, decrease the volume of the CAT 855 amplifier incrementally, until you can walk throughout the room without any acoustical feedback. Reset the volume level of the Roger NeckLoop’s volume to the middle or to the newly desired volume by pressing the volume button. A Sonova brand...