Furuno Navnet TZtouch2 Software Update Procedure page 4
Software version 6.21
Hide thumbs
Also See for Navnet TZtouch2:
- Operator's manual (367 pages) ,
- Setup procedures (19 pages) ,
- Faq (9 pages)
Advertisement
The message [system is updating...] will appear
After approximately 5 minutes the screen will go dark for about 15
seconds. Then the following screen will appear. [WARNING:
SYSTEM UPDATING...] This screen lasts about 30 seconds.
The screen is then replaced by the normal TZtouch2 startup screen
Advertisement
