Advertisement
UNINET IMAGING INC. • OKIDATA C 7000 / 7100 REMANUFACTURING INSTRUCTIONS
4. Remove the two screws located on
the the top of the drum unit cover that
hold it in place.
6. Remove the drum unit cover as
shown.
9. Remove the two screws that hold the
end cap (gearless) in place as shown.
www.u ni n e t
imaging.com
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • sales@uninetimaging.com
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
5. Use a small flathead screwdriver to push in the five tabs located on the back
and front of the cartridge to unlock the drum unit cover.
7. Remove the two screws that hold the
doctor blade in place as shown.
10. Slide the the end cap out by
approximately. two inches. The drum
axle is connected to it.
USA
EUROPE
Ph:
+1-310-280-9620
+34-93-757-1335
Fx:
+1-310-838-7294
+34-93-741-4166
8. Carefully lift one side of the doctor
blade, then the other.
11. The PCR can now be removed as
shown.
JAPAN
BRAZIL
+81-3-44-55-2789
+55-11-4822-3033
+1-310-838-7294
+55-11-4822-3353
ARGENTINA
+54-11-4571-2388
+54-11-4574-3706
Advertisement
