Table of Contents
Advertisement
Quick Links
OKIDATA C 9000 / 9500 REMANUFACTURING INSTRUCTIONS
COLOR
•
BLACK • UniDrums • UniRollers • UniParts • UniCoatings
Absolute
Absolute
OKIDATA C 9000
1. Release the toner hopper from the
drum unit by turning the blue handle
down from its upright "locked" position
as shown.
www.u ni n e t
imaging.com
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • sales@uninetimaging.com
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
AbsoluteCOLOR
COLOR PRINTER W/TONER CARTRIDGE
2. Blue handle in its downright
"unlocked" position.
USA
Ph:
+1-310-280-9620
Fx:
+1-310-838-7294
®
• AbsoluteBLACK
®
• UniDrums • UniRollers • UniParts • UniCoatings
CARTRIDGE FRONT TOP
CARTRIDGE BACK TOP
EUROPE
JAPAN
+34-93-757-1335
+81-3-44-55-2789
+34-93-741-4166
+1-310-838-7294
CARTRIDGE FRONT BOTTOM
3. Lift the hopper from the drum unit,
starting from the blue-handle side as
shown, then set aside.
BRAZIL
ARGENTINA
+55-11-4822-3033
+54-11-4571-2388
+55-11-4822-3353
+54-11-4574-3706
Advertisement
Table of Contents
Related Manuals for OKIDATA C 9000
Summary of Contents for OKIDATA C 9000
- Page 1 AbsoluteCOLOR ® • AbsoluteBLACK ® • UniDrums • UniRollers • UniParts • UniCoatings OKIDATA C 9000 / 9500 REMANUFACTURING INSTRUCTIONS COLOR • BLACK • UniDrums • UniRollers • UniParts • UniCoatings Absolute Absolute CARTRIDGE FRONT TOP CARTRIDGE BACK TOP CARTRIDGE FRONT BOTTOM...
- Page 2 UNINET IMAGING INC. • OKIDATA C 9000 / 9500 REMANUFACTURING INSTRUCTIONS FRONT BACK 4. Remove the two screws located on 5. Use a small flathead screwdriver to push in the five tabs located on the back the the top of the drum unit cover that and front of the cartridge to unlock the drum unit cover.
- Page 3 UNINET IMAGING INC. • OKIDATA C 9000 / 9500 REMANUFACTURING INSTRUCTIONS 12. Remove the Drum Erase Lamps as 13. Slide the end cap with axle out 14. Remove the screws on the remain- shown. completely. ing end cap (gearside) that hold it in place.
- Page 4 UNINET IMAGING INC. • OKIDATA C 9000 / 9500 REMANUFACTURING INSTRUCTIONS 21. Pull out the fuse holder located on 22. After cleaning and refilling the car- the side of the cartridge. tridge, replace the fuse and reassem- ble the cartridge by following the steps in reverse order.
Need help?
Do you have a question about the C 9000 and is the answer not in the manual?
Questions and answers