1. Manuals
  2. Brands
  3. Pulsar Manuals
  4. Power Supply
  5. PSUPS10A12
  6. Manual

Pulsar PSUPS10A12 Manual

Buffer power supply for 8 cameras and recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PSUPS10A12
v.1.3
PSUPS 13,8V/12V/10A/40Ah
Buffer power supply for 8 cameras and recorder.
EN**
Edition: 6 from 25.05.2015
Supercedes the edition: 5 from 06.08.2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSUPS10A12 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pulsar PSUPS10A12

Summary of Contents for Pulsar PSUPS10A12

  • Page 1 PSUPS10A12 v.1.3 PSUPS 13,8V/12V/10A/40Ah Buffer power supply for 8 cameras and recorder. EN** Edition: 6 from 25.05.2015 Supercedes the edition: 5 from 06.08.2014...

  • Page 2: Table Of Contents

    PSUPS10A12 Features:  uninterrupted voltage of 13,8V DC  EPS technical output of 230V power failure - OC type  fitting battery 40Ah/12V  PSU technical output indicating PSU failure - OC type  mains supply 230VAC  LoB technical output indicating low battery voltage - OC ...

  • Page 3: General Description

    PSUPS10A12 1.1. General description. A buffer PSU is intended for an uninterrupted supply to CCTV system devices requiring stabilized voltage of 12V DC (+/-15%). The PSU has two circuits: first 12V DC 5A for supplying the recorder, second 8x0,5A/12VDC for both cameras.
  • Page 4 PSUPS10A12 Jumper; - battery charging current configuration  Ibat =1A  Ibat =2A  Ibat =3A  Ibat =5A Description: jumper on, jumper off LB – LED battery charging indication [10] OVP - LED indicating activation of the over voltage protection OVP Fig.2.
  • Page 5 PSUPS10A12 Fig.3. The view of the PSU.

  • Page 6: Specifications

    PSUPS10A12 1.4. Specifications: - electrical specifications (tab.3) - mechanical specifications (tab.4) - operation safety (tab.5) - operating specifications (tab.6) Table 3. Electrical specifications. PSU type A (EPS - External Power Source) Mains supply 230V AC (-15%/+10%) Current consumption 1,1A @230V AC PSU’s power...

  • Page 7: Installation

    PSUPS10A12 Table 4. Mechanical specifications. Enclosure dimensions 370 x 400 x 170 + 8 (WxHxD) [mm] (+/- 2) Fixing See Fig. 3 Fitting battery 40Ah/12V (SLA) max. 180x175x165mm (WxHxD) max Net/gross weight 9,5 / 10,9 kg Enclosure Steel plate DC01 1,2mm, colour RAL 9003...

  • Page 8: Installation Procedure

    PSUPS10A12 2.2 Installation procedure. 1. Before installation, make sure that the voltage in the 230V power-supply circuit is cut off. 2. Mount the PSU in a selected location. The tamper bracket, located in the central part of the housing (see Fig. 3 [3]), signaling the attempts to detach the PSU from the mounting surface, should be screwed to the mounting surface.

  • Page 9: Operating Status Indication

    PSUPS10A12 3. Operating status indication. 3.1 LED indication. The PSU is equipped with three diodes on the front panel: AC OK:  on – The PSU supplied with 230V AC voltage  off – no 230V AC mains supply DC OK: ...

  • Page 10: Relay Technical Outputs

    PSUPS10A12 3.3 Relay technical outputs. If the OC type outputs are not sufficient to control the unit, it is possible to use the MPSBS relay module changing technical outputs of the OC type to relay type. Fig. 6. The diagram of connecting the MPSBS module.
  • Page 11 GENERAL WARRANTY CONDITIONS 1. Pulsar (the manufacturer) grants a five-years warranty for the equipment, counted from the device’s production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects, unless such...
  • Page 12 PSUPS10A12 Pulsar Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 e-mail: biuro@pulsar.pl, sales@pulsar.pl http:// www.pulsar.pl, www.zasilacze.pl...

Table of Contents