Subscribe to Our Youtube Channel
Related Manuals for Pulsar PSUPS20A12CR
Summary of Contents for Pulsar PSUPS20A12CR
- Page 1 PSUPS20A12CR v.1.0 PSUPS 13,8V/12V/20A/2x17Ah Buffer power supply for up to 16 cameras and DVR + recorder space. Edition: 1 from 01.07.2015 Supercedes the edition: ----------...
- Page 2 PSUPS20A12CR Features: DC 13,8V uninterruptible power supply of cameras battery charging current 2A/4A/8A jumper selectable DC 12V uninterruptible power supply of the recorder battery output protection against short circuit fitting battery 2x17Ah/12V and reverse polarity connection ...
- Page 3 PSUPS20A12CR 1. Technical description. 1.1. General description. A buffer PSU is intended for an uninterrupted supply to CCTV system devices requiring stabilized voltage of 12V DC (+/-15%). The PSU has two circuits: first 1x5A/12VDC for supplying the recorder and 16x0,8A/13,8V DC for both cameras.
- Page 4 PSUPS20A12CR The enclosure contains 2 fuse modules for powering 16 analog cameras. Fig.3. The view of the fuse module LB1. Fig.2. The view of the fuse module LB8. Table 3. Description of the module’s components and connectors. Component no.
- Page 5 PSUPS20A12CR Fig.4. The view of the PSU.
- Page 6 PSUPS20A12CR Specifications : 1.4. electrical specifications (tab.4) mechanical specifications (tab.5) operation safety (tab.6) operating specifications (tab.7) Table 4. Electrical specifications. PSU type A (EPS - External Power Source) 176÷264V AC / 50Hz Mains supply Current consumption 1,5A @230V AC PSU’s power...
- Page 7 PSUPS20A12CR Table 6. Operation safety. Protection class PN-EN 60950 -1:2007 I (first) Protection grade PN-EN 60529: 2002 (U) IP20 Electrical strength of insulation: - between input (network) circuit and output circuits of the PSU (I/P-O/P) 3000 V/AC min. - between input circuit and PE protection circuit (I/P-FG) 1500 V/AC min.
-
Page 8: Green Led
PSUPS20A12CR 2.2 Installation procedure. 1. Before installation, make sure that the voltage in the 230V power-supply circuit is cut off. 2. Mount the PSU in a selected location and connect the wires. 3. Connect the power cables (~230VAC) to L-N terminals of the PSU. Connect the ground wire to the terminal marked by the earth symbol –... -
Page 9: General Warranty Conditions
GENERAL WARRANTY CONDITIONS 1. Pulsar (the manufacturer) grants a two -years warranty for the equipment, counted from the device’s production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects, unless such... - Page 10 PSUPS20A12CR Pulsar Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 e-mail: biuro@pulsar.pl, sales@pulsar.pl http:// www.pulsar.pl, www.zasilacze.pl...
Need help?
Do you have a question about the PSUPS20A12CR and is the answer not in the manual?
Questions and answers