Settings For Live Performances; Settings - Yamaha DTX-PRO Reference Manual

Drum trigger module
Hide thumbs Also See for DTX-PRO:
Table of Contents

Advertisement

Settings for live performances

The settings and functions that are useful for live performances are shown below.

Settings

 AutoPowerOff
For live performances, it is recommended to disable the Auto Power-Off function.
Setting
Auto Power-Off Quick Cancel (refer to the Owner's Manual), MENU/Utility/General/AutoPowerOff
 Click (ClickOut L&R)
Turn click output to the Output jacks off.
Setting
CLICK/SETTING/ClickOut L&R
PROX
Individual Output
Choose output destinations for each pad. You can use presets to change the individual pad settings at once.
Presets are provided for eight, four, and three signal paths to choose from depending on the number of mixer inputs at the venue, or the use
of Y-cables.
Setting
MENU/Utility/Indiv Out
Bypass the panel controls from the sounds that are output from Individual Output (Preventing sounds from being affected when the values
are changed from the panel)
Setting
MENU/Utility/Indiv Out/Routing/TranCompInsByps
MENU/Utility/Indiv Out/Routing/MixerBypass
 Output Gain (L&R,
You can adjust the gain when the output level for each output jack and the settings on the connected device are different.
Setting
MENU/Utility/Output Gain
 Aux In Input Mode
At the live venue, you can monitor the audio signals (mono audio) from the PA system only through the headphones simply by connecting
the mixer to the AUX IN jack.
Setting
In MENU/Utility/Input Output/AUX In/Input Mode, select PA-HP
To monitor the stereo audio signals from the PA, set the Input Mode to "stereo," and set output to the OUTPUT jacks to "off."
 Routing function for audio files that have the guide (click) sound and accompaniment sound
separated into L and R channels
Allows the input and playback of audio files with the guide (click) sound and accompaniment sound separated into L and R channels.
PRO
Balance between the guide (click) sound and accompaniment sound in headphones can be easily adjusted with the [VOLUME]
knobs.
PROX
Balance between the guide (click) sound and accompaniment sound in headphones can be easily adjusted with the sliders.
Setting
Select L guide or R guide in MENU/Utility/Input Output/.../InputMode
Select L guide or R guide in RECORDER/SETTING/PlayMode
PROX
IndivOut)
DTX-PRO DTX-PROX Reference Manual
133

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtx-prox

Table of Contents