Yamaha DTX-PRO Reference Manual page 50

MENU Button
Screen Parameter Settings
effect
CC01–CC95
Xstick Adjust 1–127
Snare Position off, on
Ride Position off, on
Description
Controls the amount of Effect ([EFFECT] knob
value) according to how hard the pad is struck.
MinValue:
The minimum amount of Effect to be applied when
the pad is struck lightly
MaxValue:
The maximum amount of Effect to be applied
when the pad is struck strongly
Sends a Control Change message according to how
hard the pad is struck.
MinValue:
Minimum value when the pad is struck lightly
MaxValue:
Maximum value when the pad is struck strongly
MIDI Ch:
MIDI Channel
Sets the strength for switching the cross sticking to or
from the open rim shots when hitting the rim of the
multi piezo pad connected to the [qSNARE] jack.
Increasing this value makes it easier to produce the
cross-stick sound when the pad is struck strongly.
Conversely, reducing this value makes it easier to
produce the open rim shot when the pad is struck
lightly.
Turn the cross stick setting off to always play the
open rim shot sound.
Note that this parameter is not effective when a sin-
gle-piezo pad is connected.
Switches the position sensor on the snare pad on or
off.
Turn the snare position on for creating tonal changes
according to the location within a zone that is struck.
To use this function, you will need to connect a pad
with a position sensor to the [qSNARE] jack.
You will also need to select an Inst or a voice that
supports position sensing.
For more information, refer to the Data List.
Switches the position sensor for the bow of the ride
cymbal on or off.
Turn the ride position on for creating tonal changes
based on location of the pad that is struck.
To use this function, you will need to connect a pad
with position sensing to the [iRIDE] jack.
You will also need to select an Inst or a voice that
supports position sensing.
For more information, refer to the Data List.
DTX-PRO DTX-PROX Reference Manual 50