Yamaha DTX-PRO Reference Manual page 54

MENU Button
Indiv Out
PROX
Configures advanced settings for the [INDIVIDUAL OUTPUT] jacks.
Select the pad or audio source with the "
jacks using the [–][+] controllers.
The Kit Modifier (excluding RealAmbi) and MasterEQ parameters are not applied to Indiv Out.
Pad:
Display ALL KK
Pad All Kick Snare
1/2: INDIVIDUAL OUTPUT [1/2] jack
3/4: [3/4] jack
5/6: [5/6] jack
7/8: [7/8] jack
Use the " " button ([F1]) to select "ALL" to configure settings for all pads.
Use the button below "PRESET" ([F1]) to select a preset, and then confirm the selection with the button below "SET" ([F3]).
There are four presets available for the ALL setting.
PRESET1 Uses eight Indiv Out signal paths to output Kick, Snare, Tom, and Cymbal+HH in stereo.
PRESET2 Uses eight Indiv Out signal paths to output Kick, Snare, HH, and Ride in mono, and Tom and Crash in stereo.
PRESET3 Uses four Indiv Out (1, 3, 5, and 7) signal paths to output Kick, Snare, Tom, and Cymbal+HH in mono.
PRESET4 Uses three Indiv Out (1, 3, and 5) signal paths to output Kick, Snare, and Tom+Cymbal in mono.
" and " " ([F1] and [F2]) buttons, and then choose how to connect the L and R signals to the
SN T1 T2 T3
Tom1 Tom2 Tom3
Audio source:
Display
Audio source
HH C1 C2 RD
Hi-Hat Cymbal1 Cymbal2 Ride
CLK AUX
Metronome AUX IN
P3 P5 P7 P13
Pad3 Pad5 Pad7 Pad13
USB REC
Bluetooth audio
USB audio Recorder
DTX-PRO DTX-PROX Reference Manual
P14
Pad14
54