Chapter 3 Other Settings; Updating This Product - Yamaha Disklavier ENSPIRE DKC-900 Owner's Manual

Chapter
3
Other Settings

Updating this product

Yamaha product firmware may occasionally be updated to improve
functionality and operability. Certain functions may not be available with older
firmware versions, so we recommend following the instructions below to
update to the latest version.
1
Download the update program file.
You can download the update program from the following site:
https://download.yamaha.com/
2
Copy "en_update.bin" included in the downloaded file to the
root directory of the USB flash drive.
3
Press the [P] (Standby/On) button to turn the power off.
4
Connect the USB flash drive to the [USB] terminal on the
front of the switch box.
USB flash drive
5
While holding down the [R/K] (Play/Pause) button, press
the [P] (Standby/On) button.
+
If any available update program is detected, this product starts to
update. The update progress is indicated with the [- VOLUME +]
indicators.
When the update is complete, this product restarts automatically.
After this product restarts, check the firmware version using the
ENSPIRE Controller app.
26
[USB] terminal
Flashing
twice
Note:
• To update this product, you will
need a USB flash drive with 2GB
or more of free space.
• You can also update this product
using the ENSPIRE Controller
app. To update this product using
the app, Internet connection is
required.
Note:
It is recommended that the USB
flash drive only contains the update
program file.
Important:
DO NOT turn the power off or
disconnect the USB flash drive
during update.