Phones Eq - Yamaha DTX-PRO Reference Manual

MENU Button

Phones EQ

Parameters in this section are used for adjusting the tone of all sounds played through the headphones.
In specific terms, this four-band headphone EQ allows the signal level to be freely boosted or cut around a center frequency specified for each
of the bands. In addition, the "Low" and "High" frequency bands can be set to either shelving or peaking type equalization.
Although results may vary depending on the headphones you use, boost the Lo setting when low sounds such as kick are too quiet to hear. Cut
the Hi setting when cymbals are too loud.
With the DTX-PROX, you can quickly adjust the Phones EQ gain by setting the fader select to CUSTM and using the LED rotary faders.
Gain
MENU/Phones EQ
Q
Low HighMid
LowMid
Four EQ bands
HPEQ Gain
HPEQ Freq
HPEQ Q
HPEQ Shape
Frequency (Hz)
High
DTX-PRO DTX-PROX Reference Manual 59