Advertisement
First Use
Before applying power to the router, connect all the components that you need for your
applications. You cannot operate the router without a connected antenna, inserted SIM card,
nor a connected power supply.
Do not run the router without an antenna connected to the main antenna connector as the
energy from the transmission is effectively reflected by the open end and can damage
the equipment.
1. Antenna
Use an SMA connectors to connect the antennas to the router, see the figure below. Con-
nect the main antenna to the ANT connector. The second diversity antenna can be connected
to the DIV connector to improve the quality and reliability of a wireless link. Three antenna
connectors on the right side (ANT, DIV and GPS) are intended for connecting the antennas
to the first module. There are also two antenna connectors for the second module on the left
side (ANT and DIV ).
2. SIM card
The SIM card readers, for 3 V and 1.8 V SIM cards, are located on the rear panel of the
router. If you intend to use this device to communicate over a cellular network, please place
an activated data-provisioned SIM card into the SIM card reader. Push your SIM card into the
SIM1, SIM2, SIM3 or SIM4 slot until it clicks into place.
QSG-0002-EN, August 4, 2021
17
Released in the Czech Republic
SmartMotion
Advertisement
