Advertisement
2. Configuration Settings via WebAccess/DMP
Your router has been pre-installed with the WebAccess/DMP client. For its activation,
enable it in the router's web interface (Customization -> User Modules -> WebAccess/DMP
Client). For more information see the configuration manual of your router.
The activated client periodically uploads router identificators, its configuration, and cel-
lular network statistics to the WebAccess/DMP server. If you have purchased a part
number ending with "-SWH", the DMP client is activated by default.
With the WebAccess/DMP client activated, you may configure the router from WebAc-
cess/DMP portal. Navigate your browser to https://www.wadmp.com.
If this is your first time, please self-sign-up with the site. If not, please log in with your
username and password. Once logged in, further assistance can be found at
wadmp.com.
3. Restoring and Backing up the Router Configuration
If you reset the router, the current configuration will be replaced by the default factory
settings. We recommend you to back up the router configuration before resetting the device.
Refer to the configuration manual for more information.
Once the router boots up and the PWR LED starts blinking, you can restore the default
router configuration. To do so, press the RST button on the rear panel of the router. After you
press this button, all settings are reset to the default values, and the router will reboot.
After logging on to the device for the first time, we strongly recommend changing the
default password due to security reasons. Simultaneously, you will gain access to all
functions of the router.
For security reasons, it is highly recommended to update the firmware of the router to the
latest version regularly. Downgrading the firmware to an older version than the production
version or uploading a firmware intended for a different device may cause the malfunction
of the device.
Support
All product-related manuals, documents, and software can be found and downloaded on
the web site at
icr.advantech.cz/download
Hereby, Advantech Czech s.r.o. declares that the radio equipment type SmartFlex
SR300 (versions with radio interface only), SR303, SR304, SR305, SR306, SR307
and SR310 is in compliance with Directive 2014/53/EU.
SmartFlex SR300 versions without radio interface are in compliance with the essential require-
ments and other relevant provisions of Directives 2014/30/EU and 2014/35/EU.
The full text of the EU Declaration of Conformity is available at the following internet address:
icr.advantech.cz/eudoc
QSG-0002-EN, August 4, 2021
address.
14
Released in the Czech Republic
SmartFlex
https://docs.
Advertisement
