Controls & Components - Shop fox W1878 Owner's Manual

Controls.&.Components
Refer to Figures.1–4 and the following descriptions to
become familiar with the basic controls and components
of this machine. Understanding these items and how they
work will help you understand the rest of the manual and
stay safe when operating this machine.
A.. ON/OFF.Paddle.Switch.w/Removable.Key:.Turns
machine ON and OFF. Remove key to prevent motor
from being started.
B.. LED.Worklamp.ON/OFF.Button:.Turns worklamp ON
and OFF.
C.. Fence:.Used for ripping, resawing, or cutting tenons.
Distance from blade determines width of cut.
D. Miter.Gauge:.Used for cross cuts. Can be adjusted at
any angle 60° left or right.
E.. Miter.Gauge.Lock.Knob:.Secures angle position of
miter gauge.
F.. Fence.Lock.Handle:.Secures fence position.
G.. Guide.Post.Adjustment.Knob:.Rotate to adjust
height of blade guides above workpiece.
H.. Guide.Post.Lock.Knob:.Secures height of blade
guides.
I.. Upper.Blade.Guide:.Supports blade above workpiece
during operations.
Model W1878 (For Machines Mfd. Since 4/21)
To. reduce. your. risk. of. serious. injury.
or. damage. to. the. machine,. read. this.
entire.manual.BEFORE.using.machine.
B
A
Figure.1. Fence, power, and miter gauge
G
I
Figure.2. Guide post controls.
-6-
C D
E
F
controls.
H