Table of Contents
Advertisement
The bandsaw wheels must be aligned for optimal machine
performance. Properly aligned wheels are parallel and
coplanar (see Figure.20).
Improper blade tension and cutting practices can
negatively affect blade tracking. Familiarizing yourself
with the ideas and conditions described in Figure.20.will
help you recognize when your wheel alignment may need
to be adjusted (refer to Wheel.Alignment on Page.44.for
detailed instructions).
The wheels on the W1878 were aligned at the factory,
so center tracking is the only adjustment that needs to
be performed when the saw is new. This adjustment is
necessary before turning the saw on or performing other
adjustments.
Model W1878 (For Machines Mfd. Since 4/21)
Parallel And
Coplanar
Coplanar But
Not Parallel
Figure.20. Wheel alignment and
misalignment examples.
-20-
or
Parallel But Not
Coplanar
Not Coplanar or
Parallel
Advertisement
Table of Contents
