EMP-Centauri MS9/4EIP-8 Instruction Manual page 4

and re-plug the product into the power grid again.
• The power supply can fail temporarily in case of overload or overheating. The cause can be
current consumption of devices connected to the satellite inputs of product which exceeds the
specifications, see section 2) Product Specifications. The next cause can be the overheating of
product in consequence of wrong installation, see section 4) Product Storing and Installation.
Disconnect the product from the power grid, remove the cause, and re-plug the product into the
power grid after a few minutes again.
If the failure cannot be removed, please contact your distributor.
10) Symbols Explanation
certificate of conformity
protective bonding
safety transformer
According to EU directive, electric and electronic devices which are identified by one of the following
symbols must not be disposed of together with municipal waste.
11) Wiring Diagram
More wiring examples are shown at the manufacturer's website.
12) Contact
Manufacturer: EMP-Centauri s.r.o.
5. kvetna 690
339 01 Klatovy 4
Czech Republic
LNB
(QUATTRO,
QUAD)
TERR ANTENNA
MS9/4EIP-8
MS9/8EIP-9
for indoor use only
class II device
international standard for digital satellite equipment control,
number (1.0, 1.1, 1.2 or 2.0) determines DiSEqC version.
LNB
(QUATTRO,
QUAD)
tel: (+420) 376 323 813 (sales)
tel: (+420) 376 323 853 (tech. support)
info@emp-centauri.cz
www.emp-centauri.cz
4 of 4
DC power supply
fuse protected