Replacing The Batteries; Cleaning The Scale - ETEKCITY EB4074C User Manual

Clearing the Scale
If the scale has been moved or flipped upside down, it must be
cleared to ensure accurate results.
1. Place the scale on a hard, flat surface.
2. Step on the scale until digits appear on the display, then step
off.
3. The scale will show "

Replacing the Batteries

1. Open the battery compartment on the underside of the scale.
2. Remove the old batteries and dispose of them properly.
3. Install 2 new 1.5V AAA batteries. Make sure the polarities
match.
4. Close the battery compartment, place the scale on a hard, flat
surface, and wait for the display to show "

Cleaning the Scale

1. Use a slightly damp cloth to clean the surface of the scale,
followed by a soft, dry cloth to wipe away the remaining
moisture.
2. Do not use chemical or abrasive cleaning agents to clean the
scale.
" when cleared.
8
" before using.