Electrolux EB6GL5QCN User Manual page 21

2. Place half of the ingredients in a
baking dish.
3. Insert the tip of the food sensor
exactly in the centre of the casserole.
The food sensor should be stabilized
in one place during baking. Use a
solid ingredient to achieve that. Use
the rim of the baking dish to support
the silicone handle of the food
sensor. The tip of the food sensor
should not touch the bottom of a
baking dish.
4. Cover the food sensor with the
remaining ingredients.
5. Put the plug of the food sensor into
the socket located in the front frame
of the appliance.
The display shows the food sensor
symbol.
6. Press or
seconds to set the food core
temperature.
7. Set a heating function and, if
necessary, the oven temperature.
8. To change the food core
temperature, press
in less than 5
.
When the dish is at the set temperature,
an acoustic signal sounds. The appliance
deactivates automatically.
9. Touch any symbol to stop the signal.
10. Remove the food sensor plug from
the socket and remove the dish from
the appliance.
WARNING!
There is a risk of burns as
the food sensor becomes
hot. Be careful when you
unplug it and remove it from
the food.
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Baking tray/ Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
Wire shelf and baking tray / deep pan
together:
Push the baking tray / deep pan between
the guide bars of the shelf support and
the wire shelf on the guide bars above.
ENGLISH 21