Menu Setting - Citizen CL-S521 User Manual

2
Printer Operation
Mode Settings
®
[Datamax
Menu Setting Table
Global Config menu - allows you to switch between 3 complete 'config sets' contained within the printer.
Page Setup Menu - allows you to change settings related to the media or print quality.
System Setup Menu - allows you to change settings for the printer hardware and basic control systems.
After Print Menu - changes how the printer reacts after the label has been printed.
Interfaces - changes interface parameters such as baud rate.

Menu Setting

7 Datamax
®
Top Menu
Global
configuration
Page Setup
System Setup
Emulation]
Emulation
Sub Menu Default
– Config Set 1
Print Speed 4 IPS
Print Darkness 10
Darkness Adjust 0
Continuous Media 4.00 IN
Length 101.6mm
Vertical Position 0.00 IN
0.0mm
Horizontal Shift 0.00 IN
0.0mm
Vertical Image Shift 0.00 IN
0.0mm
Media Sensor See Through
Small Media OFF
Adjustment
Small Media 1.00 IN
Length 25.4mm
Sensor Level 1.5V
Paper End Level 2.80V
Error Reporting On Printing
Buzzer Select ON
Metric/Inch Inch
Max Media Length 10.00 IN
254.0mm
Settings Lock Off
Keyboard Lock Off
Control Code STD
Menu Remarks
Config Set 1 Sets the Config Set.
Config Set 2
Config Set 3
2 to 6 IPS Printing speed setting
(2 to 4 IPS with optional peeler.)
00 to 30 Print darkness setting
(printhead temperature)
-10 to 10 Darkness command adjustment
0.25 to 32.00 IN Setting default length of continuous media,
6.40 to 812.8mm if selected. ; the lower line is in metric mode.
-1.00 to 1.00 IN Print start position adjustment
-25.4 to 25.4mm
-1.00 to 1.00 IN Horizontal printing location adjustment
-25.4 to 25.4mm
0.00 to 32.00 IN Adjust the off set value in vertical when
0.0 to 812.8mm mapping data on a RAM.
See Through Label sensor selection
Reflect
None
ON Setting for small labels
OFF
0.25 to 1.00 IN Setting length of small label media
6.40 to 25.4mm
0.0V to 3.3V Setting the threshold of the sensor
0.01V to 3.00V Sets the paper end level.
On Printing Setting for error report.
Immediate
ON Setting buzzer sounding conditions
OFF
Inch Setting the units used
mm
1.00 to 50.00 IN Setting the maximum label length
25.4 to 1270.0mm
On When on, prevents software commands from
Off changing the values set by the VuePrint menu
On Prevents the control panel from affecting the
Off printer's configuration. (User "lock-out")
STD Selects between the Standard STX control
ALT code or the "Alternative" code. Sometimes
ALT-2 called "AS400 mode".
32