Memory Switch Setting Mode - Citizen COMPACT CT-S310II Service Manual

CT-S310II Series Service Manual
5-3.

Memory Switch Setting Mode

Settable Memory Switches
MSW1, MSW2, MSW3, MSW4, MSW5, MSW7, MSW9MSW7, MSW9, MSW10
The memory switch can be set by pressing the FEED switch and opening or closing the printer
cover.
For details about memory switch settings, refer to the specifications sheet or instruction
manual.
1) Starting the memory switch setting mode
(1) Set the paper and open the cover. Then turn the power on while holding down the
FEED switch.
(2) Press the FEED switch twice. Close the printer cover, and the memory switch setting
mode starts.
(3) Settings and operation guidance are printed out.
2) Selecting the memory switch
The current status of memory switch 1 is printed out.
(1) Each time the FEED switch is pressed shortly (two seconds or shorter), the switch is
selected in the order of "Memory SW 1", "Memory SW 2", "Memory SW 3", ..."Memory
SW 10", "Write/Factory Setting", "Memory SW 1", and the status of the selected switch is
printed out.
(2) Select the memory switch for which you want to change the setting, and hold down the
FEED switch (two seconds or longer).
The setting change mode is selected and the setting of the currently selected memory
switch is printed out.
Memory SW (1) 00000000
Memory switch
currently selected
Current status of the
memory switch
- 56 -