Setting The Media - Citizen CL-S521 User Manual

Menu Setting Table (p.32)

Setting the Media

Media Sizes
The position of label and tag media is sensed by either a transparent sensor
or a reflective sensor.
Transparent sensor: Detects the gaps between label media and notches of
tag media
Reflective sensor: Detects the black mark
Label media
B
C
A
Label
H
Label
G
Label
Transparent sensor
A Label width
B Liner width
C Label left edge position
D Length of gap between labels
E Label length
F Label pitch
G Liner thickness
H Total media thickness
I Position of right edge of notch
J Position of left edge of notch
K Notch length
L Right edge of black mark
M Left edge of black mark
N Black mark width
* Use a transparent sensor for label media gaps and media with black marks.
* Use a transparent sensor for fan fold media.
* If the label pitch is 1 inch or less, set the Small Media Adjustment menu to ON
and match it to the label that uses the value of the Small Media Length menu.
21
Printer Operation
Continuous media
Notch detection Black mark detection
I
L
M
I
J
Media direction
Min. value mm (inches) Max. value mm (inches)
19.50 (0.77) 1 18.00 (4.65)
19.50 (0.77) 1 18.00 (4.65)
0 (0) 2.54 (0.10)
2.54 (0.10) 812.8 (32.00)
6.35 (0.25) 812.8 (32.00)
6.35 (0.25) 812.8 (32.00)
0.06 (0.0025) 0.125 (0.0049)
0.06 (0.0025) 0.25 (0.01)
3.60 (0.14) 60.80 (2.39)
0 (0) 57.20 (2.25)
2.54 (0.10) 17.80 (0.70)
15.00 (0.59) 66.50 (2.62)
0 (0) 51.5 (2.02)
3.18 (0.125) 17.80 (0.70)
Printed area
Reflective sensor