Table of Contents
Advertisement
2 INSTALLATION
Levelling the machine
Warning!
• The lock nuts on all four feet must be screwed tightly against the
housing.
Connect the water supply hose
Warning!
To prevent leakage or water damage, follow the instructions in this
chapter.
• Do not kink, crush or modify water inlet hose.
Note!
• Connect manually, do not use tools. Check if the connections are tight.
Drain Hose
Warning!
•
Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water
leakage.
•
It is not allowed to remove the buckle of drain pipe.
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level
using a spirit level.
Connect the water
supply hose to the
water inlet valve
and a water tap
with cold water as
indicated.
14
Advertisement
Table of Contents
