Page 1
Operation Manual Version 1.0 IBZA Series IBZA12 Compact Multipurpose Loudspeaker Keep these important operating instructions. Check www.tecnare.com for updates.
Page 3
EXEL ACOUSTICS SL CL Encinar, 282 – Pol. Ind. Monte Boyal 45950 Casarrubios del Monte (Toledo) Spain Phone: (+34) 918 170 110 Fax: e-mail: support@tecnare.com www.tecnare.com IBZA Series | rev.
Use the rigging accessories described in the rigging manual a follow the associated procedures. CAUTION: Rigging should only be done by experience professionals. This speaker enclosure is capable of creating a strong magnetic field. Please use IBZA Series | rev.
Connection to PA4.1500 .................... 16 Connection to PA21/PA3000 ..................17 Connection to T-44 Series ..................17 Integrating IBZA12 Using Subwoofers ................ 18 Integrating IBZA12 Loudspeakers Systems with Tecnare Subwoofers ..... 18 Signal Delay ....................... 18 Technical specifications ....................19 IBZA Series | rev.
All Tecnare products are carefully engineered for world-class performance and reliability. ® If you would like further information about this or any other Tecnare product, please contact us. We look forward to helping you in the near future. As part of a continuous evolution of techniques and standards, Exel Acoustics SL as ®...
IBZA Series constitutes a broad range of point source, full range loudspeakers that providing high SPL, different directivities patterns and a good sonic performance off-axis. The IBZA Series is suited to various sound reinforcement applications as a main or complementary system.
In full-range mode with or without processor the IBZA12 is perfect for speech or vocal, such as conferencing or place of worship. With a processor, it offers highly accurate music reproduction. Combined with Tecnare® subwoofers, IBZA12 is capable of high level performance in mid-sized venues.
In certain specific cases it is possible to slightly under-power the subs or loudspeakers as long as the amplifier will not be driven to its limits. In any case, the Tecnare processors should be deployed in front of the amp to ensure that the amplifiers to not go into clip.
Ensure that the loudspeakers are securely attached to prevent personal injury and property damage. NOTE TECNARE recommends using only the accessories specified by TECNARE to secure the loudspeakers. Vertical Point Source Good coverage of audiences often requires a conflicting combination of wide coverage ("short-throw") for the closest listeners (below cabinet axis) and narrow coverage ("long-throw")
If your IBZA10 loudspeakers and subwoofers are separated by a greater distance - or delay must be used between them - a measurement system such as SMAART should be used to determine the correct delay and polarity. IBZA Series | rev.
Page 14
Loudspeaker Configuration Frequency Range (+/- 6dB) 38- 18KHz Recommended ratio 1xSW-215: 4xIBZA12 SW 215 IBZA12 + SW-215 IBZA Series | rev.
6. Rotate the horn carefully on the desired position and place the horn and driver back into the cabinet. It will fit comfortably snug. 7. Replace the four (4) horn flange screws. 8. Carefully replace the grille cover and the two (2) metal reinforcement profiles with its six (6) screws. IBZA Series | rev.
Damping factor is a ratio of rated loudspeaker impedance (ZL) to the source impedance (Zs). In this case our source impedance is (Rcable + Ramplifier). Damping Factor = Z ® The table below indicates the cable valour recommended by Tecnare Recommended maximum length 8 Ω 4 Ω...
Tecnare loudspeaker controllers. ® Tecnare only recommends using preset/amplifier developed by Tecnare; otherwise there is a risk of damaging the loudspeaker components. DP Series Loudspeaker Controller, PA Series amplifier and T-Series amplifier are ideal for this purpose. Ensure that the right preset was selected before connecting the loudspeaker with the amplifier.
Integrating IBZA12 Loudspeakers Systems with Tecnare Subwoofers An IBZA12 loudspeaker system can be deployed in combination with Tecnare's subwoofers likes a SW215, SW118M, SW-18VR. These subwoofers can achieve very low frequency response extending system response appreciably and increasing the overall acoustic power of a system in the lowest frequencies.
Application information is presented for guidance only. Exel Acoustics SL reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program Exel Acoustics SL tries to maintain the highest degree of product compatibility. IBZA Series | rev.
Page 22
Operation Manual S PEAK O N 1 + 1 - S PEAK O N 1 + 1 - IBZA1 2 600 W AE S 8 O H 150101 /00 1 IBZA12 Dimensions IBZA Series | rev.
Page 23
Exel Acoustics. Tecnare and PCC-Net are trademarks of Exel Acoustics SL. Podware, System Engineer, BvNet, Smaart and all third-party trademarks mentioned herein are the property of their respective trademark holders.
Need help?
Do you have a question about the IBZA Series and is the answer not in the manual?
Questions and answers