Salvo Mode; Menu Mode - GRASS VALLEY NV9640 User Manual

Follow these steps to use chop:
1 Select a destination. The 'Destination' field of the display shows the destination you chose.
2 Select a source. This is the first source.
3 Press the chop button.
4 Select another source. This is the second source. The chop is immediately activated on the
routers (of the default destination) that support chop.
To terminate the chop, (1) press the chop button again to turn it off, (2) select the destination
you had chosen for the chop, then (3) select any source.

Salvo Mode

The NV9640 enters a minor "salvo mode"
temporary mode, usually brief, where you are given an opportunity to reconsider the salvo you
are about to execute. The NV9640's display tells you the name of the salvo and instructs you to
press the take button to execute the salvo. If you wish to cancel the salvo before it executes,
press the salvo button again.
After you press take or cancel the salvo, the panel returns to its previous mode.
See Salvo

Menu Mode

The NV9640 enters menu mode when it has a menu button and you press it.
The menu has 4 menu choices and an exit button:
SOFTWARE SOFTWARE
VERSIONS VERSIONS
Press 'Exit' when you want to leave the menu and return to the previous button page. The
alphanumeric display a sort of roadmap of the button menu:
Main Menu Main Menu
1. Other panels, such as the NV9601, have a more extensive "salvo mode. "
on page 62.
LCD LCD
USER USER PANEL PANEL CONTROL CONTROL
Preset Status Level/Dest
Software Software
User User
Panel Panel
LCD Control 4 LCD Control 4
1
when you press a salvo button. Salvo mode is a
EXIT EXIT
• • •
1 1
2 2
3 3
Exit 10 Exit 10
NV9640
User's Guide
69