Fujitsu ETERNUS LT260 User Manual page 12

Chapter 1 Overview
1.2 References for Setup
IMPORTANT
Refer
Refer
Refer
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
Setting the LT260
Perform the settings for the LT260.
Change the topology setting to "Fabric". Set a fixed value for the link speed.
-
"Chapter 2 Setting the LT260" (page 22)
-
"2.2 Settings for Fibre Channel Connections" (page 22)
-
"2.2.1 Setting the Link Speed" (page 22)
-
"2.2.3 Setting the Topology (for Connections via FC Switches)" (page 23)
Setting the Operating System
Make settings for the HBA driver and the device driver.
-
"3.1 Solaris OS" (page 26)
-
"3.1.2 Fibre Channel Connections" (page 27)
Setting Backup Software
Apply patches, make settings for the robot driver, and set up the backup software.
•
Backup software used
-
NetBackup
•
"4.1 NetBackup" (page 38)
-
NetWorker
•
"4.2 NetWorker" (page 41)
-
IBM Spectrum Protect (IBM Tivoli Storage Manager)
•
"4.3 IBM Spectrum Protect" (page 43)
Copyright 2019 FUJITSU LIMITED
12
P3AM-8812-07ENZ0