Fujitsu ETERNUS LT260 User Manual page 15

Chapter 1 Overview
1.2 References for Setup
Refer
Refer
1.2.2.3 Fibre Channel Connection (Fabric Connection) for Linux
The following procedure explains how to connect the LT260 to a Linux server with a fabric connection.
Workflow
Refer
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
Setting the Operating System
Make settings for the HBA driver and the device driver.
-
"3.2 Linux" (page 31)
-
"3.2.1 Fibre Channel Connections/SAS Connections" (page 31)
Setting Backup Software
Apply patches, make settings for the robot driver, and set up the backup software.
•
Backup software used
-
NetBackup
•
"4.1 NetBackup" (page 38)
-
NetWorker
•
"4.2 NetWorker" (page 41)
-
IBM Spectrum Protect (IBM Tivoli Storage Manager)
•
"4.3 IBM Spectrum Protect" (page 43)
-
NetVault
•
"4.5 NetVault" (page 45)
Making a Check before Starting the Procedure
Check the FC switches and the environment (operating system, backup software, and HBAs) of
the server to be connected to the LT260.
-
"1.1 Operating Environment" (page 8)
Copyright 2019 FUJITSU LIMITED
15
P3AM-8812-07ENZ0