Fujitsu ETERNUS LT260 User Manual page 48

Chapter 4 Setting Backup Software
4.5 NetVault
4
5
6
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
Specify the Generic Cleaning items as follows:
• When an LTO5 drive is used (model name: LT26ASHE, LT26ASHL, LT26AFHE, LT26AFHL)
- Issue a load command to start cleaning cycle: ON (the default setting is "ON")
- Use Generic Cleaning: ON (the default setting is "OFF")
• When an LTO6, LTO7, or LTO8 drive is used (model name: LT26BSKE, LT26BSKL, LT26BFKE,
LT26BFKL, LT26BSME, LT26BSML, LT26BFME, LT26BFML, LT26BSNE, LT26BSNL, LT26BFNE,
LT26BFNL)
- Issue a load command to start cleaning cycle: OFF (the default setting is "ON")
- Use Generic Cleaning: ON (the default setting is "OFF")
The following shows an example configuration in which "Issue a load command to start cleaning
cycle" is set to "OFF" and "Use Generic Cleaning" is set to "ON".
Enter "b" and then press the [Enter] key.
The Device Configuration screen appears again.
Enter "2" and then press the [Enter] key.
"2) Configuration..." is selected. The Configuration screen appears.
Copyright 2019 FUJITSU LIMITED
48
P3AM-8812-07ENZ0