Raider RD-OMT01 User Manual page 14

14 www.raider.bg
• In case of electrical or mechanical malfunction, immediately switch off the tool and
disconnect the plug.
• If the cord is damaged or cut through while working, do not touch the cord, but immediately
disconnect the plug.
• Never use the tool when cord is damaged; have it replaced by a qualified person.
• When you put away the tool, switch off the motor and ensure that all moving parts have
come to a complete standstill.
4.2. WHEN SAWING / CUTTING
• Hold power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring or its own cord (a cutting accessory contacting a
"live" wire may make exposed metal parts of the power tool "live" and could give the operator
an electric shock).
• Keep hands away from cutting area; never reach underneath the material for any reason
while cutting.
• Use suitable detectors to find hidden utility lines or call the local utility company for
assistance (contact with electric lines can lead to fire or electrical shock; damaging a gas line
can result in an explosion; penetrating a water pipe will cause property damage or an electrical
shock).
• Do not use a saw blade which is cracked, deformed or dull.
4.3. WHEN SANDING
• Dust from material such as paint containing lead, some wood species, minerals and metal
may be harmful (contact with or inhalation of the dust may cause allergic reactions and/or
respiratory diseases to the operator or bystanders); wear a dust mask and work with a dust
extraction device when connectable.
• Certain kinds of dust are classified as carcinogenic (such as oak and beech dust)
especially i n conjunction with additives for wood conditioning; wear a dust mask and work
with a dust extraction device when connectable.
• Follow the dust-related national requirements for the materials you want to work with
• Use the tool only for dry sanding (penetration of water into the tool increases the risk of
an electric shock).
• Do not touch the moving sanding sheet.
• Do not continue to use worn, torn or heavily clogged sanding sheets.
• When sanding metal, sparks are generated; do not use vacuum cleaner and keep other
persons and combustible material from work area.
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth
terminal of the plug.
• If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely
and not left unattended.
5. ASSEMBLY AND OPERATING
• INSTALLING ACCESSORIES
All accessories are installed on the multi-tool in a similar manner. For the purposes of
describing the accessory installation, the half circle blade is used.
DANGER: Always remove the plug from the power source before installing or removing
accessories or sandpaper. Failing to remove the plug from the power source may result in the
tool accidentally being started and causing serious injury to the operator.