Set Balance Type - GE HumiLab Operator's Manual

Set balance
type
54
Page
OUTPUT2
O)TMPC 1)TMPF
Make a selection and continue as with Output 1, or press
return to the Scale Outputs sub-menu. Press
the Main menu.
From the main menu, press 2 to change the type of balance used by
the Electronics Module, adjust the balance interval, or remotely
initiate a balance cycle. The current state will be echoed followed
by a sub-menu:
BALANCE TYPE = PACER
DAY =0
HOUR =12
1) PACER BAL
4) INITIATE BALANCE
Press 1 to set the type of balance to
the type of balance to
following will appear:
DAY=
Type a value for the number of complete days between balance
cycles and press RETURN
HOUR =
Type a value (in 24-hour format — e.g. 2 p.m. = 14) for the number
of fractional days between balance cycles and press
interval time will be echoed, and you will be returned to the Set
Balance Type sub-menu.
EXAMPLE :
Day =0
Hour = 12
Day = 1
Hour =0
Day =5
Hour = 12
At the Set Balance Type sub-menu, press
cycle. If you do this, the Electronics Module will be returned to
E)EXIT
2) AUTO BAL 3) SET INTERVAL
E) EXIT
PACER
AUTO . Press 3 to set the balance interval. The
. The following will appear:
Balance every 12 hours
Balance every 24 hours
Balance every 5 1/2 days
Appendix B — Humilab chilled mirror hygrometer
E
E again to return to
(the default) or 2
RETURN
4 to initiate a balance
to
to set
. The