FRAME IT ALL 300001228 Quick Start Manual

300001228/300001232
300001510/300001511
300001369 (Sandbox Canopy/Cover)
300001370 (Sandbox Canopy/Cover)
SKU# 300001369 COMBO KIT CONTAINS:
•
Composite timbers 4' x 6
•
Brackets x 12
•
**Stakes x 6
•
Plugs x 24
•
Caps x 6
•
Sandbox Canopy/Cover x 1
•
Telescoping Poles x 6
SKU# 300001510 | 300001511 KIT CONTAINS:
•
Composite timbers 4' x 12
•
Brackets x 24
•
**Stakes x 12
•
Plugs x 48
•
Caps x 6
•
Sandbox Canopy/Cover x 1
FOR INDOOR &
HARD SURFACE:
If you plan to assemble sandbox on a hard surface, use
hacksaw to remove the spike of each stake. Use these
cut down stakes for the base level only of your
sandbox.
Customer Service: 1800-914-9835 |
© Frame It All. All Rights Reserved.
SANDBOX
HEXAGON
SKU# 300001370 COMBO KIT CONTAINS:
•
Composite timbers 4' x 12
•
Brackets x 24
•
**Stakes x 12
•
Plugs x 48
•
Caps x 6
•
Sandbox Canopy/Cover x 1
•
Telescoping Poles x 6
SKU# 300001228 | 300001232 KIT CONTAINS:
•
Composite timbers 4' x 12
•
Brackets x 24
•
**Stakes x 12
•
Plugs x 48
•
Caps x 6
**NOTE
Stacking stakes can be used on all levels
Trim stake spike
with hacksawfor
and when creating additional levels.
use indoor or on
ONLY Stacking Stakes can stack!
hard surfaces
support@frameitall.com
ASSEMBLY INSTRUCTIONS
Layout your timbers along the borderline
and connect each timber together by
inserting the top of the stake through the
bracket loops with the stake pointing to
the sky. This enables you to freely position
your border to get your desired location.
STEP 1:
Assemble the timbers by sliding one end of timber into channel end
of one of the brackets. Use plugs to cover the holes on both sides to
lock the bracket in place.
Repeat this process on the opposite end of the timber flipping the bracket in the opposite
direction (see image below). Repeat for all timbers.
STEP 2:
Layout the base level of your raised garden in a hexagon (6-sided) shape, using 6 x 2'
timbers. Insert stake through the hole of the bracket and into each of the corners to lock
all sides in place. Adjust accordingly to your desired shape.
STEP 2a: For one level, add caps to each of the top
corner joints to finish off the raised garden.
ASSEMBLY INSTRUCTIONS – For Product with Second Levels
STEP 3:
For the second level, use 6 timbers and the stacking stakes. Insert one stake through the
brackets into the hole on top of the stake beneath it to lock the second level in place.
Lastly, add the caps to each of the top corner joints to finish off the raised garden.
How the Joints Work
Use a Cap to
complete the
top level.
Use Stacking
stakes for
ground level
frames or
Use plugs (included)
borders.
Use plugs to
cover the holes to cover the holes on
ONLY use – two plugs are
both side of timbers
Stacking Stakes
required per
when creating bracket (1 on
additional levels.
each side)
HAPPY GARDENING!
Use stacking
Stacking stake fit
stake when
into the tops of
creating a
other Stacking
multi-level
stakes