Advertisement
Quick Links
1 LEVEL
1 LEVEL SANDBOX COMBO KIT CONTAINS:
SKU# 300001369
Composite
Stacking
Timbers x 6
Brackets x 12
2 LEVELS SANDBOX KIT CONTAINS:
SKU# 300001228|300001232
Composite
Stacking
Timbers x 12
Brackets x 24
Triangle Cardboard Gauge is included! DO NOT THROW IT AWAY!
Tools needed: Hammer (to tap stake in place), Hackshaw (optional)
Plugs
x 24
Stake
Caps
x 6
x 6
Plugs
x 48
Stake
Caps
x 12
x 6
Customer Service: 1800-914-9835 | support@frameitall.com
© 2020 Frame It All. All Rights Reserved.
300001369 (Sandbox Canopy/Cover)
300001370/300001515 (Sandbox Canopy/Cover)
2 LEVELS
Sandbox Canopy
Liner x 1
/Cover x 1
Kit with Sandbox Canopy/Cover combo
will have the additional items below.
SKU# 300001370|300001515
Liner x 1
Sandbox Canopy
/Cover x 1
300001228/300001232
HEXAGON
SANDBOX
7' x 8'
Layout your timbers
along the borderline and
connect each timber
together by inserting the
top of the stake through
the bracket loops with
the stake pointing to the
sky. This enables you to
freely position your
Telescoping
border to get your
Pole x 6
desired location.
Caps
Telescoping
Pole x 6
x 6
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for FRAME IT ALL 300001228
Summary of Contents for FRAME IT ALL 300001228
- Page 1 Telescoping /Cover x 1 Pole x 6 Triangle Cardboard Gauge is included! DO NOT THROW IT AWAY! Tools needed: Hammer (to tap stake in place), Hackshaw (optional) Customer Service: 1800-914-9835 | support@frameitall.com © 2020 Frame It All. All Rights Reserved.
- Page 2 ASSEMBLY INSTRUCTIONS STEP 1: For one level, assemble 6 x Doubled-Bracket Timbers (A) For two levels, assemble 12 x Doubled-Bracket Timbers (A) X 12 Attach one single stacking bracket to each end of timbers (one facing up, one facing down – shown above) STEP 2: Place liner in desired location and lay it flat.
- Page 3 ASSEMBLY INSTRUCTIONS – For Product with Second Level only NOTE: Before flipping the stake around and hammering into the ground to permanently pin the 1 level, line up the 2 level to make sure the bottom level is positioned properly. STEP 3: Once 1 level is secured, assemble 2 level using 6 (A) timbers and the...
- Page 4 ASSEMBLY INSTRUCTIONS – For Telescoping Hexagon Canopy/Cover FORMING THE CANOPY DOME STEP 2: Manually expands the canopy STEP 1: In an open area, position the spokes evenly in each direction as much canopy so that the inside of the canopy as possible.
- Page 5 ASSEMBLY INSTRUCTIONS – For Telescoping Hexagon Canopy/Cover ATTACHING THE CANOPY (NOTE: 2-person job to make it much easier) STEP 1: Position canopy top so that canopy connectors are aligned with support poles. STEP 2: Insert support pole into canopy connector cap (refer to image on left).
Need help?
Do you have a question about the 300001228 and is the answer not in the manual?
Questions and answers