FRAME IT ALL 300001178 Assembly Instructions

Split waterfall tri-level raised garden bed

SPLIT WATERFALL TRI-LEVEL

Layout your timbers along the borderline

and connect each timber together by

inserting the top of the stake through the

bracket loops with the stake pointing to the

sky. This enables you to freely position your

border to get your desired location.

KIT CONTAINS:

Straight Composite

Timbers x 20

Tools needed: Hammer (to tap stake in place), Hackshaw (optional)

RAISED GARDEN BED

Curved Composite

Brackets x 56

Timbers x 8

Customer Service: 1800-914-9835 | support@frameitall.com

Stacking

Stake x 28

300001178

300001179

Plugs x 112

Caps x 12

Table of Contents

Do you have a question about the 300001178 and is the answer not in the manual?

Page 1 Curved Composite Stake x 28 Brackets x 56 Caps x 12 Timbers x 20 Timbers x 8 Tools needed: Hammer (to tap stake in place), Hackshaw (optional) Customer Service: 1800-914-9835 | support@frameitall.com © 2020 Frame It All. All Rights Reserved.
Page 2 ASSEMBLY INSTRUCTIONS STEP 1: Assemble 20 x Doubled-Bracket Straight Timbers (S) Attach one single stacking bracket to each end of timbers (both facing up – shown below). X 20 You will need 10 (S) Timbers for the 1 (base) level, 6 (S) Timbers for the 2 level, 2 (S) timbers each for 3 and 4...
Page 3 ASSEMBLY INSTRUCTIONS STEP 4: Arrange 6 (S) and 2 (C) STEP 5: Arrange 2 (S) and 2 (C) Timbers to create the 2 level with Timbers each to create the 3 and 4 the curved timber facing each end. level with the curved timber facing each end.

300001179