Entering Reference Conditions - Beko METPOINT FLM SF13 Installation And Operating Manual

Installation and operating manual

6.3.4. Entering reference conditions

Setup → Sensor Setup → Ext. Setup
Filtertime
Setup → Sensor Setup → Ext. Setup → Ref. Pres
Setup → Sensor Setup → Ext. Setup → Ref. Temp
Setup → Sensor Setup → Ext. Setup → Filtertime
28
Enter the reference parameter values.
To change the reference pressure, press the >>UP<< button to
select the "Unit" field and confirm by pressing the >>ENTER<<
button.
Press the >>UP<< button to select the desired unit and confirm
by pressing the >>ENTER<< button 2x.
Enter the reference temperature.
Under "Filtertime", you can enter an attenuation, provided that
a "Filtergrade" is entered.
Possible values: 0 -10000 in [ms].
EN
METPOINT SF13
®