Table of Contents
Advertisement
EN
6.2. Setup menu
Press the >>ENTER<< button to call up the setup menu.
The setup menu is password-protected.
6.3. Sensor Setup
Setup → Sensor Setup
25
53.1 mm
Default password (factory settings): 0000 (4 x zero).
If required, change the password by selecting
.
Setup→Password
Press the >>UP<< button to select and to change a value.
Press the >>ENTER<< button to confirm the selection or change.
To make a change, select the respective menu option using the
>>UP<< button and confirm by pressing the >>ENTER<< button.
Installation and operating manual
Setup→User
METPOINT
SF13
®
Advertisement
Table of Contents
