Table of Contents
Advertisement
EN
2.4. Control and display elements
2.4.1. Version with display
METPOIN T
FLOW MEASURING
395,38
160515
AIR
HW:1.00 SW:1.00
NOTICE
Additional information
For more information regarding the operation of the device, see „Configuration and operation" auf Seite
24.
2.4.2. Version with LED
METPOINT
®
The METPOINT
FLM features a LED calibration indicator mounted at the top of the housing. After 15 months, the LED begins to
®
flash, indicating that the device needs to be calibrated. The flashing LED does not have any effect on the measuring process, and
the device continues to provide accurate measuring signals.
On request, the calibration interval can be adjusted at the factory.
11
F LM
®
m
/h
3
m
3
FLM
Installation and operating manual
Plug-type connector A
Plug-type connector B
METPOINT
SF13
®
Advertisement
Table of Contents
