EN
6.3.4. Entering reference conditions
Setup → Sensor Setup → Ext. Setup
Filtertime
Setup → Sensor Setup → Ext. Setup → Ref.Pres
Setup → Sensor Setup → Ext. Setup → Ref.Temp
Setup → Sensor Setup → Ext. Setup → Filtertime
METPOINT
SF53
®
psi
° F
psi
° F
Enter the reference parameter values.
To change the reference conditions, press the >>UP<< button to
select the "Unit" field and confirm by pressing the >>ENTER<<
button.
Select the desired unit with the >>UP<< button and confirm 2x
by pressing the >>ENTER<< button.
Enter the reference temperature.
Under "Filtertime", you can enter an attenuation, provided that
a "Filtergrade" is entered.
Possible values: 0 -10000 in [ms].
Installation and operating manual
31