Installation and operating manual
6.3.1. Entering pipe inside diameter
Setup → Sensor Setup → Diameter
6.3.2. Entering / changing consumption counter value
Setup → Sensor Setup → Total Counter
NOTICE
Consumption counter value
When the consumption counter reaches 1,000,000,000 m³, it is automatically reset to 0.
26
To change the unit, press the >>UP<< button to select the "Unit"
field and confirm by pressing the >>ENTER<< button.
Press the >>UP<< button to select the desired unit and confirm
by pressing the >>ENTER<< button 2x.
Press the >>UP<< button to select the value to be changed and
confirm by pressing the >>ENTER<< button.
Press the >>UP<< button to enter the new value and confirm by
pressing the >>ENTER<< button.
To change the unit, press the >>UP<< button to select the "Unit"
field and confirm by pressing the >>ENTER<< button.
Press the >>UP<< button to select the desired unit and confirm
by pressing the >>ENTER<< button 2x.
Press the >>UP<< button to select the value to be changed and
confirm by pressing the >>ENTER<< button.
Press the >>UP<< button to enter the new value and confirm by
pressing the >>ENTER<< button.
EN
METPOINT
SF13
®