Download Print this page

Bosch FPA-1000 Release Notes page 11

Analog addressable fire panels
Hide thumbs Also See for FPA-1000:

Advertisement

Analog Addressable Fire Panels
5.3
Known Issues in Version 1.12
6
Release Notes for Version 1.11
6.1
New Features in Version 1.11
No new features introduced in this version.
6.2
Issues Fixed in Version 1.11
6.3
Known Issues in Version 1.11
7
Release Notes for Version 1.10
7.1
New Features in Version 1.10
Bosch Security Systems, Inc.
New SLC devices: The following SLC devices are supported:
FAP-325-IM Miniature Response Contact Monitor
FLM-325-I4-A Contact Monitor 4-inch Class A
FLM-325-I4-AI Contact Monitor 4-inch Class A w/Isolator
FLM-325-2R4-2A Dual Relay Module 2 A
FLM-325-2R4-2AI Dual Relay Module 2 A w/Isolator
FLM-325-2R4-8A Dual Relay Module 8 A
FLM-325-2R4-8AI Dual Relay Module 8 A w/Isolator
Phone line 2 trouble: In/out calls on phone line 2 no longer initiate line disconnect
trouble signals.
Real-time event printing features including programmable delay: This feature, as
described in the IOG and Online Help, is now available on MMI and Web page.
Answer unknown trouble: When remote access is enabled, incoming calls (non-modem)
result in a trouble message. Currently, a "work around" is to disable remote access.
New SLC devices: The FAP-325-T Analog Multisensor Detector is in the literature as SLC
device, but is not available yet.
Phone line 1 troubles: In/out calls on phone line 1 no longer initiate line disconnect or
dialer answering trouble signals.
Remote dial-up connection: The remote dial-up connection for web-based programming
is not working.
Support for new SLC devices:
FAP-325-V2F Analog Photoelectric Smoke Detector Flat
FLM-325-NA4 Supervised Output Module (Class A and B)
FLM-325-NAI4 Supervised Output Module (Class A and B, with Isolator)
Expansion of the SLC protocol to be able to connect up to 254 devices and/or modules
to one SLC-loop (applies to new SLC devices)
SLC device group types
For the FPE-1000-SLC V1.25 or higher, the maximum SLC current is increased to allow
more devices being connected to one SLC
FLM-325-B6S: Programming option for activation by host detector
Release Notes
Release Notes for Version 1.11 | en
F.01U.075.638 | 08 | 2012.08
11

Advertisement

loading