Using The Show Interfaces Command - Cisco 7304 Installation And Configuration Manual

Chapter 4 Configuring the 6E3 Line Card
Router#

Using the show interfaces Command

The show interfaces command displays status information (including the physical slot and interface
address) for the interfaces you specify. The example that follows specifies serial interfaces.
The outputs that appear in this document may not match the output you receive when running these
Note
commands. The outputs in this document are examples only.
OL-5061-01
0x150:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x160:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x170:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x180:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x190:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x1A0:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x1B0:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x1C0:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x1D0:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x1E0:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x1F0:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FPGA information:
Current FPGA version
IOS bundled FPGA version :00.16
CPLD version :01.02
LC recoveries happened so far:1
LC Crash History:
LC 2, LC Santa Ana, channel A, error counters:
SL0
Reframe: [
Overrun: [
Underrun: [
OOB: [
Disparity: [
Missing_Ctrl_Code: [
Chip access errors:[
LC 2, NSE Santa Ana 0, channel A, error counters:
SL0
Reframe: [
Overrun: [
Underrun: [
OOB: [
Disparity: [
Missing_Ctrl_Code: [
Chip access errors:[
Linecard interrupt counters:
Egress droped packet = 11 (23:41:58 ago)
Alarms = 30 (23:56:13 ago)
Egress hw error = 10 (23:41:58 ago)
Linecard egress hardware error counters:
Pkt buffer invalid i/p hdr = 10 (23:41:58 ago)
No sop flag at the packet hdr = 4 (23:44:24 ago)
Port id error = 10 (23:41:58 ago)
Cisco 7304 6-Port Clear Channel E3 Line Card Installation and Configuration
:00.16
SL1 SL2 SL3
0 0 0 0 ]
0 0 0 0 ]
0 0 0 0 ]
0 0 0 0 ]
0 0 0 0 ]
0 0 0 0 ]
0 0 0 0 ]
SL1 SL2 SL3
0 0 0 0 ]
0 0 0 0 ]
0 0 0 0 ]
0 0 0 0 ]
0 0 0 0 ]
0 0 0 0 ]
0 0 0 0 ]
Checking the Configuration
4-13